compatibility page
Support Code 1250 / output tray closed: Meaning and Safe Fixes
Plain-English lookup page for Support Code 1250 / output tray closed, with safe first checks, buying cautions, stop warnings, and official support references.
Quick answer
Canon 1250 usually means the output tray or paper exit path is not open as expected. It is a physical setup check, not an ink or printhead problem. Start with reversible checks, capture the exact model and wording, and verify the model-specific support page before buying parts.
Before you buy
Use these checks to avoid the most common wrong-part detours.
- Do not buy ink or cartridges for an output-tray code.
- Do not replace rollers until tray position and paper exit are checked.
- Check for a cracked tray latch before ordering parts.
Step 1
What this code usually means
Canon 1250 usually means the output tray or paper exit path is not open as expected. It is a physical setup check, not an ink or printhead problem.
The likely bucket is output tray, paper exit, or front cover position. That bucket is a starting point, not a substitute for the exact model manual.
Step 2
Safe first checks
Work through the lowest-risk checks first. Stop before service-mode resets, chip bypasses, unsupported disassembly, or repeated cleaning cycles.
- Open the output tray fully.
- Remove paper or objects blocking the tray.
- Close and reopen the front tray or cover as the model manual shows.
- Restart the print job.
Step 3
Stop warnings
These are the points where a cheap-looking fix can become a damaged printer, leaked ink or toner, lost warranty path, or unsafe repair.
- Do not force a stuck tray.
- Do not tape a tray or cover sensor.
- Use support if the tray will not move normally.
Support Code 1250 / output tray closed triage summary
| Signal | This page says | Buying posture |
|---|---|---|
| Risk | Low caution | Verify model and part category first. |
| Confidence | medium | Treat broad messages as triage, not diagnosis. |
| Category | Output tray, paper exit, or front cover position | Match the exact support page before ordering anything. |
FAQs
Should I buy a part for 1250 right away?
No. First match the exact model, the full display wording, and the official support path. Many codes are cleared by paper, queue, seating, or setup checks rather than a new part.
What should I write down before contacting support?
Record the printer brand, exact model, full error text, when it appears, what changed recently, and whether the printer can still print a local test or status page.
Official and reference sources
Official links are kept separate from affiliate links so you can verify compatibility and safety details.
- 1Canon printer support code manuals
Canon online manual entry point for support-code meanings and model-specific troubleshooting.
Independent troubleshooting note
Printer Fix Finder is independent and is not affiliated with Brother, HP, Epson, Canon, Microsoft, Apple, Amazon, retailers, manufacturers, or organizations mentioned unless explicitly stated.
Start with safe, reversible troubleshooting steps. Do not open electrical components, bypass safety mechanisms, or reset service counters unless the manufacturer instructs you to do so.
Keep going